What is NEORife?

NEORife is a highly effective bioresonance device, representing a frequency generator with computer program control of the outgoing frequency in the sound range. The device works with electrical frequencies on the bioresonance principle discovered by Dr. Royal Raymond Rife. The device is powered with a voltage of 12 V, safe for use by man.

It is established that bacteria, viruses, and parasites have their own vibration frequencies. If the latter is known, the pathogen can be destroyed through the exposure to radiation with a greater amplitude than its own frequency wave. Rife has discovered that the walls of the membranes are destroyed, and the harmful organism quickly dies. Every disease, caused by a pathogen - a bacteria, a virus, or fungi, can be cured, if the agent is eliminated, and the immune system goes to its normal and healthy state. The advantage of Rife's method is that the treatment won't damage a single healthy cell: they emit different frequencies. Rife's list includes over 1500 medical conditions that can be treated successfully. Apart from cancer, the frequency generator can treat AIDS, rheumatism, asthma, measles, epilepsy, tuberculosis, syphilis, leprosy, streptococcus, and numerous others.

By any means, the treatment of cancer is not a chimera - Dr Royal Raymond Rife has proven this fact during the 1930s of the last century. In 1929, the young American scientist discoveres the virus of cancer, and then isolates and injects it in 400 rats. All laboratory animals were infected and subsequently cured. Rife proves that every disease can be overcome if treated by a certain electrical frequency. He discovered that the principle of resonance, used by opera performers to break a glass, could be applied to the fight against more than 1500 diseases. Knowing the frequency of the infected cells, Rife exposed them to radiation and destroyed their membranes. Then, the organism absorbed the unhealthy tissue by itself. Rife was successful in applying the method to cancer patients; moreover, he managed to save the healthy cells.

What are the advantages of NEORife over similar products?

>> read Features

>> FAQ

What are the advantages of NEORife over similar products?

1. High production quality: In contrast to rival devices, often assembled at home and fitted with 'do it yourself' printed circuits, NEORife is produced in a professional manner and in conformity with all European and international standards that treat this type of production. High quality German electronic components and printed circuit boards with a gold and nickel cover (NiAu) have been used for its manufacturing. Each production unit passes through a strict control test guaranteeing full conformity with the specified parameters.

2. No toxic substances: Unfortunately, as a part of a common practice, rival devices are offered with handles made of stainless steel. Producers are unaware of the level of toxic substances they discharge. For our products, we use only handles made of pure copper, emitting beneficial copper ions that additionally augment the positive effect from the use of the device.

3. Copper handles are better suited for holding: In contrast to Dr. Clark herself, who uses alligator clips to connect the handles to the outgoing cable of the device, our cables are tightly and securely connected. In this way, we have done our best to avoid deposit formation on the handles, due to the poor contact of the alligator clips. In addition, we managed to substantially improve the transferred outgoing signal.

4. High level of safety: In contrast to rival devices, plugged directly to the main power supply (220V) and using non-regulated adaptors with dubious qualities and origin, NEORife is powered by USB from the computer. In an effort to secure maximum level of safety for our clients, without affecting the effectiveness of the device, we remade and perfected its scheme and attained all required starting parameters, eliminating the requirement for connection to the 220 V power supply.

5. Better warranty: Our devices are offered with a 2-year full warranty: all defects that occur in the process of normal exploitation during the warranty period are removed free-of-charge /at our expense) and whenever necessary, your device will be replaced with a new one.

6. Better results: In contrast to rival appliances with dubious properties, our devices have been subject to strict control tests and are guaranteed to cover the declared parameters. Clients often call us to share about the wonderful results they have attained by using our products.

In order to use NEORife, you have to first install the program „FreqGen" on your computer:

Download and install on your computer.

In the box of NEORife, apart from the device, you will also find:

1. Standard USB cable - serves to charge the device from the computer.

2. Audio cable - transmits the signal from the computer to the device.

3. Cable with 2 copper handles on it - transmits the signal from the device to the user.

4. Instructions for use

5. Warranty

Sequence of actions:

Connect the cable with the copper handles to the device by plugging it to the jack, intended for it ("Output"). Afterwards, connect NEORife to the computer through the USB cable (one cable end connects to a free USB port on the computer and the other end to the USB port on the device). If everything is carried out properly, a red lamp on the device will lit up, signalizing it is charged with electricity. The next step is to connect the audio cable to the device and the computer; again, one cable end plugs into the jack on NEORife (which is intended for the purpose), and the other end plugs into the audio out of the computer (standard stereo jack for headphones/ loud speakers). When the device is switched on, do not allow any contact between the two copper handles! Make sure all applications on the computer are closed, especially those that generate sound (video/audio players, internet, games, etc.)

Start the program „FreqGen" and a window with 1500 alphabetically listed diseases will open on the monitor, which can be treated with the respective resonance frequencies, destroying the bacterial and viral agents that cause them.

Upon double clicking on the selected disease with the mouse, a black window opens and the program starts to generate a sound wave which, through NEORife, connected to the computer, is transformed into electrical impulses. The same impulses are transmitted to you through the two copper handles on the device, intended for contact with the palms. Adjust the strength of the outgoing electrical impulses through the button for amplifying the sound (on the computer) so that the physical sensation from the contact between your hands and the copper handles is not unpleasant.

Important: If the green lamp above the sign "Frequency" does not lit up or the sensation while holding the handles is too weak, amplify the sound to maximum (in this way, the outgoing voltage and effectiveness of the device will increase).*

After you start the program and select a certain disease, a black window opens on the monitor. At the bottom line, it shows two numbers that are separated by comma (for example, 380, 180). A green light on NEORife flickers in synchrony with the set frequency.

The left number on the screen shows the frequency in Hz, corresponding to the disease you have selected. The right number displays the duration in seconds, for which the program will generate the frequency. Because most diseases are treated with more than one frequency, when the program goes through one frequency, it will automatically switch to the next one, until it runs through all frequencies (which takes about 30-40 minutes). Then the program will switch off automatically and the green lamp on the device will turn off. This is the moment at which the session is over, and you have to leave the copper handles and unplug the device from the computer.

* Keep in mind that the sensitivity threshold is about 1000-2000 Hz, and all other frequencies above this one are hardly impossible to be felt physically by someone who uses the device. Only if the device works with frequency under 1000 Hz, you will feel slight pricking from the electricity that is running through the copper handles. For better effect, always moisten your hands with a bit of water, before you hold the copper handles. Be careful not to wet the computer or the box of the device. 

Schedule for one treatment session with NEORife:

1. Connect NEORife to the computer using the two cables on the device.
2. Make sure all applications on the computer are closed, especially those that generate sound (video/audio players, internet, games, etc.)
3. From the computer, start the pre-installed program for work with the device and select the disease you would like to treat. If the green light above the sign 'Frequency' does not lit up, amplify the sound of the computer to its maximum. 
4. Moisten* your hands and take the copper handles in them (one handle for each hand).
5. Hold the handles until the program runs through all frequencies and shuts down automatically.
6. After you finish your session, unplug the device from the computer.

* For better effect, always moisten your hands with a bit of water, before you hold the copper handles. Be careful not to wet the computer or the box of the device.

You can have no more than two treatment sessions per day, one in the morning and one in the evening!

ATTENTION!

     1. This device should not be used by:  

      - pregnant women

      - persons with pacemakers and other implanted devices

      - persons with heart problems

      - children under the age of 12

     2. Do not use the device during thunderstorms.

     3. When the device is switched on, do not allow contact between the two copper handles.

     4. Do not wet the device.

Program for manual control of the outgoing electrical frequencies:

In addition, we have devised an option for persons who prefer to manually set the working frequencies of the device:

The program is quite small in size, and you don't need to install it before use. Just download it in the desired directory and start. Once you start the program, you can manually enter a random frequency in the window that pops up. When you press the 'Start' button, the program will start generating sound. Upon plugging NEORife to the audio out of the computer, this frequency will automatically turn into an electrical impulse. 

List of over 1500 diseases and all frequencies that correspond to their treatment:

ATTENTION:

1. To make sure that the generated electrical impulses are effective, place a tick on the 'Square Wave' (under the window where you type frequencies). It is considered that only rectangular impulses destroy pathogenic organisms.
2. Use every frequency for no more than 3 minutes (unless the list of frequencies shows another time for use).
3. All counter-indications and methods for work with NEORife are valid for use with this and any type of program.
4. This program is intended for use only by individuals who prefer to manually control the working frequency and duration of the treatment session with NEORife. To fully enjoy the benefits of the device, it is sufficient to run the program „FreqGen"!

• For more information on the use and the functioning of NEORife, please refer to the "Disease" section of the site.